​Usually $85-$125, available all year. $50 diagnostic fee/deposit required in advance.
Oil change, new spark plug, new air filter(s), sharpen & balance blade, clean deck, inspect cable(s), replace worn/broken items as needed, clean, lube, adjust & test run.
Additional repairs/replacement of worn/broken components will add to the total.
​Pickup & delivery available.

Usually $125-$185, available all year. $50 diagnostic fee/deposit required in advance.
Oil change, new spark plug, new air filter(s), fuel filter (if equipped), inspect/clean cooling fins, sharpen & balance blade(s), clean deck, check belt, cables & controls for damage/wear, remove drive wheels, inspect & lube pinion gears/springs/keys/axle bearings/bushings, replace worn/broken items as needed, reassemble, clean unit, adjust & test run.​
Additional repairs/replacement of worn/broken components will add to the total.
​Pickup & delivery available.

Starting at $195, available all year. $100 diagnostic fee/deposit required in advance.
Oil change, new spark plug, new air filters, fuel filter (if equipped), inspect/clean cooling fins, sharpen & balance blades, clean deck, check belts, cables & controls for damage/wear, check spindle shaft fastener torque, verify proper blade timing, adjust timing belt tension, inspect drive system, replace worn/broken items as needed, inspect, clean, lube, adjust & test run.
Additional repairs/replacement of worn/broken components will add to the total.
​Pickup & delivery available.

Usually $225-$300, available all year. $100 diagnostic fee/deposit required in advance.​
Engine oil & filter change, check/clean debris from cooling system, replace spark plug, air filter(s), fuel filter, sharpen & balance blade, clean deck, lube grease points, inspect belts & pulleys, check spindle bearings, test battery & charging system, adjust tire pressure, PTO clutch & deck level as needed, check for leaks & other worn/broken components & replace as needed, clean unit & test run. Price includes the following where applicable: air filter, pre-filter, fuel filter, oil filter, spark plug(s), engine oil, shop supplies and labor. Prices will vary by model.
Additional repairs/replacement of worn/broken components will add to the total.
​Pickup & delivery available.

Usually $275-$405, available all year. $100 diagnostic fee/deposit required in advance.
Engine oil & filter change, check/clean debris from cooling system, replace spark plug(s), air filter(s), fuel filter, sharpen & balance blades, clean deck, lube grease points, inspect belts & pulleys, check spindle bearings, test battery & charging system, adjust tire pressure, PTO clutch & deck level as needed, check for leaks & other worn/broken components & replace as needed, clean unit & test run.
​Price includes the following where applicable: air filter, pre-filter, fuel filter, oil filter, spark plug(s), engine oil, shop supplies and labor.
Prices will vary by model. 
Hydraulic oil & filter change is available if applicable to your machine, but not included.
Additional repairs/replacement of worn/broken components will add to the total.
​Pickup & delivery available.

​Usually $275-$405, available all year. $100 diagnostic fee/deposit required in advance.
Engine oil & filter change, check/clean debris from cooling system, replace spark plugs, air filter(s), fuel filter, sharpen & balance blades, clean deck, lube grease points, inspect belts & pulleys, check spindle bearings, test battery & charging system, adjust tire pressure, tracking, PTO clutch & deck level as needed, check/add deck gearbox oil on models so equipped, check for leaks & other worn/broken components & replace as needed, clean unit & test run.
​Price includes the following where applicable: air filter, pre-filter, fuel filter, oil filter, spark plug(s), engine oil, shop supplies and labor.
Prices will vary by model. 
Hydraulic oil & filter change is available if applicable to your machine, but not included.
Additional repairs/replacement of worn/broken components will add to the total.
​Pickup & delivery available.

Usually $295-$435, available all year. $100 diagnostic fee/deposit required in advance.
Engine oil & filter change, check/clean debris from cooling system as needed, replace spark plugs, air filter(s), fuel filter, sharpen & balance blades, clean deck, lube grease points, inspect belts & pulleys, check spindle bearings, test battery & charging system, adjust tire pressure, tracking, PTO clutch & deck level as needed, check/add deck gearbox oil on models so equipped, check for leaks & other worn/broken components and replace as needed, clean unit & test run.
Price includes the following where applicable: air filter, pre-filter, fuel filter, oil filter, spark plug(s), engine oil, shop supplies and labor.
Prices will vary by model. 
Hydraulic oil & filter change is available if applicable to your machine, but not included.
Additional repairs/replacement of worn/broken components will add to the total.
​Pickup & delivery available.

​Usually $325-$495, available all year. $100 diagnostic fee/deposit required in advance.
Engine oil & filter change, check/clean debris from cooling system, replace air filter(s), fuel filter(s), sharpen & balance blades, clean deck, lube grease points, inspect belts & pulleys, check spindle bearings, test battery & charging system, adjust tire pressure, tracking, PTO clutch & deck level as needed, check/add deck gearbox oil on models so equipped, check for leaks & other worn/broken components & replace as needed, clean unit & test run.
​Price includes the following where applicable: air filter, pre-filter, fuel filter(s), oil filter, engine oil, shop supplies and labor.
Prices will vary by model. 
Hydraulic oil & filter change is available if applicable to your machine, but not included.
Additional repairs/replacement of worn/broken components will add to the total.
​Pickup & delivery available.

Usually $150-$275; $100 diagnostic fee/deposit required in advance.
Winter Prep. Clean/rebuild or replace carburetor, replace spark plug, flush fuel tank, change oil (4 cycle machines only), inspect primer bulb, fuel line, primer line, starter rope, belt, pulleys, paddles & scraper; test electric starter (if equipped), verify proper operation & adjustment of controls, replace other worn/broken items as needed. 
Final price will vary by make & model.
Replacement of worn/broken items will increase price above what is listed here.
​Pickup & delivery available.

Usually $225-$375; $100 diagnostic fee/deposit required in advance.
Winter Prep. Clean/rebuild or replace carburetor, replace spark plug, flush fuel tank, change oil (4 cycle machines only), inspect primer bulb, fuel line, primer line, starter rope, belts, pulleys, skid shoes, scraper, shear bolts/pins, & drive system, adjust tire pressure, lubricate moving parts, test electric starter (if equipped), verify proper operation & adjustment of controls, replace other worn/broken items as needed. 
Final price will vary by make & model.
Replacement of worn/broken items will increase price above what is listed here.
​Pickup & delivery available.

$65.00 within 1 driven mile, increases with each additional mile. Prepayment required. Available all year.
We offer pickup and delivery of your equipment, starting at $65.00 plus tax; price depends on your location. Price includes both pickup and delivery. Visit our Transportation Rates page for more info.

$12.00 and up, available all year
We sharpen and balance blades. Cannot be bent or worn out.
Most blades: $12.00 each blade, customer brings blade(s) to us off of mower; $18.00 each blade, customer brings the mower, we remove/sharpen/balance/reinstall blade(s).
Must be paid at time of drop-off, sales tax & card fee not included.
Walk-ins are welcome for any blade off of the mower, and for blade(s) still mounted on "regular size" walk behind mowers.
Heavy duty blades such as brush-hog blades are billed by the hour.

Price varies by job and equipment type, available all year
We can repair deck/PTO issues, drivetrain issues, electrical issues/rodent damage, oil leaks, hard starting/no starting, steering/tracking issues, fuel system issues, welding, and more.
​Diagnostic fee and transportation (if needed) required in advance. Sorry, but we cannot give estimates over the phone. Machine must be in our shop before an estimate can be given. Turnaround time will vary.
​Pickup & delivery available.

​$35 and up, available all year
Do you have an old lawnmower you no longer want? We can make it disappear for you. Cost is $35 for standard walkmowers; $100 for riding products, larger walk behind mowers, etc., not including transportation.
​Pickup available.

WARNING: You wouldn't want us to dump unwanted equipment in your driveway or front lawn, so don't dump your unwanted equipment here without discussing it with us first!

$35 + parts (please read ALL details below)
Parts and tax not included.
Tire must be in suitable condition for use with inner tube, if an inner tube is desired.
​There is usually no way to know this until the tire is unseated from the rim.
Add $10.00 sealant clean-out fee if tire sealant (such as Slime) was used previously. 
Due to frequent fitment issues with tires purchased elsewhere, $10 may be added if we did not supply the tire.
Walk-ins are welcome unless the wheel is still attached to the machine.

​​$100 diagnostic fee/deposit required in advance.
Fuel system issues, belt replacement, scraper/skid shoe replacement, paddles/scraper replacement, cable adjustment/replacement, auger/bearing/gearbox issues, wheel drive issues, oil leaks and more. Does not include Winter Prep Service work. $100 deposit required in advance; final price will vary by make, model and extent of repairs.
Transportation not included.
​Pickup & delivery available.

$50 and up
Prices and turnaround time vary by job. Sorry but we cannot weld aluminum at this time. Contact us to discuss.

​​$100 diagnostic fee/deposit required in advance.
Final price will vary by make, model and extent of work performed. We do not work on the electrical side of the generator unit.
​Diagnostic fee and transportation (if needed) required in advance. Sorry, but we cannot give estimates over the phone. Machine must be in our shop before an estimate can be given. Turnaround time will vary.
​Pickup & delivery available.